I moved into my house almost four years ago, and last month I finally got around to organizing my garage.
Until about a week ago, I’d pretty much just find an empty place on the floor in the garage and put stuff there; if I ran out of empty space on the floor, I’d start stacking items. There’s a closet in the garage where I kept a lot of stuff — luggage, sports equipment, camping gear — but whenever I needed something, I’d have to pull everything out and then shove everything back into a chaotic pile. It was annoying. The garage does have this little workshop area in the back with a workbench, but it too basically turned into my junk room.
So last month I decided it was time to do something about it.
But I didn’t know where to start.
Luckily, my father-in-law, Rick Surwilo, has one of the most organized garages I’ve ever seen. He’s been able to maximize every bit of space in his so that he can fit his and my mother-in-law’s car in there along with tools, ladders, a wheelbarrow, paint cans, scrap pieces of wood, and even two fridges (one’s a mini).
So I asked him if he’d help me out and he was happy to oblige.
In the course of two weekends and with a little help from my son Gus, we were able to get my garage into tip-top shape. For those of you who have a “system” like the one I had until recently, I share what I did in the hopes that it can provide some inspiration for organizing your own garage.
Organize Your Garage As Soon As You Move In
My first tip for garage organization is to do it as soon as you move into your house. One of the reasons I put off organizing my garage for so long is that I felt like I didn’t have to because I didn’t have much stuff to store. But before I knew it, I had a full garage of tools and whatnot, but no place to put things. Even if you don’t have a lot of stuff in your garage when you first move in, put in shelves and racks. Sure, they might be empty for awhile, but they’ll fill up quickly with things you need to maintain your abode.
Put Up 1×12 Wall Shelves
The cheapest way to add storage space in your garage is to make shelves with some shelf brackets and 8-foot-long 1×12 boards. Rick has these all over his garage. I put in four along one wall in my garage, and I’ll probably be putting more of these up in the years to come.
Install a Rack For Shovels, Rakes, Brooms, Etc.
Season after season, my rakes, shovels, hoes, and brooms sat in the corner of my workshop. Getting the tool I needed was a hassle. It required pulling out all those that I didn’t need to get to the one I wanted.
In his garage, Rick has this rack system from Husky in place where each tool hangs individually. Getting the tool you want is a breeze and they’re off the floor. I wanted the same system.
We mounted the rack from Husky to my wall and then added the hanging attachments. Pretty easy, and I’ve still got space on my rack to add more tools.
Make a Cubbyhole Shelf
My biggest issue with the workshop area is that in the past few years I had amassed a large collection of screws, nails, wood glues, and other doodads, but didn’t really have a place to put them; they just sat on my workbench taking up valuable space. In his garage, Rick had solved the problem of expanding and encroaching doodads by building what he calls a cubbyhole shelf. It’s essentially a frame with horizontal shelves going across, divided by little vertical shelves every now and then. You basically just create little cubbies. Sterilite 01748501 4-D... Check Amazon for Pricing.
It’s pretty easy to put together. Here’s what you’ll need:
- 1x8s (number to be determined by how big your overall frame is going to be plus the number of shelves you want)
- Wood screws
- (8) 1 ½” corner braces
- (6) 4” corner braces
Construction is a snap. The unit we created is a 4′ x 4′ square.
Cut your 1x8s to the appropriate length. I was able to get two 4′ boards out of a single 10-foot 1×8.
Screw the boards together to create the frame, minus the top board; hold off on that for now. Drilling pilot holes first helps make driving the screws easier.
Once you have the frame built, reinforce it by placing a couple 1 ½” corner braces in each corner of the bottom of the frame.
Now we add another shelf. First, put in the vertical dividers. You’ll need to decide how many cubbies you want and how tall you want the shelf space. For the first row, I wanted three cubbies that were 8″ high, so I cut two dividers out of the 1×8 that were 8″ tall. Cut another piece of 1×8 for the shelf, and screw it all in.
Repeat the process until you get to the top of the shelving unit and then add the top of the frame.
Again, the dimensions you use and the material you’ll need will vary depending on your own garage. Adjust these plans as necessary.
Wall Control 30-WGL-20... Best Price: $60.72 ($0.19 / oz) Buy New $66.00 ($0.21 / oz) (as of 11:15 EST - Details)
Racor 89601 Tool Organ... Best Price: null Buy New $29.99 ($0.54 / oz) (as of 04:15 EST - Details)
Akro-Mils 10144 D 20-I... Best Price: $27.50 Buy New $29.89 (as of 12:45 EST - Details)
Edsal TRK-602478W5 Hea... Best Price: null Buy New $147.62 (as of 02:25 EST - Details)